loading...
loading...
Capacity 250 GB
Form Factor M.2 2280
Interface PCIe 3.0 x4
Seq Read 3500 MB/s
Seq Write 2300 MB/s
Endurance (TBW) 150 TBW
Price history excludes Amazon sources
The Samsung 970 EVO Plus 250GB represents a mature execution of Samsung’s vertical integration strategy, utilizing a proprietary in-house design rather than a third-party reference layout. The drive is architected around the Samsung Phoenix controller (S4LR020), backed by 512MB of LPDDR4 DRAM for logical-to-physical mapping tables. Distinct from the non-Plus predecessor, this model utilizes 9x-layer V-NAND 3-bit MLC (TLC), which allows for increased density and latency improvements that effectively saturate the PCIe 3.0 bus in read-heavy scenarios. While the 250GB model offers high throughput, its write performance is physically constrained by the lower count of NAND dies available for interleaving compared to the 1TB and 2TB variants. Field notes: The Phoenix controller is historically known for running hot under sustained loads. To mitigate thermal throttling, the drive features a nickel-coated controller and a heat-spreading copper foil label on the rear PCB, a distinct physical identifier for this series. Analysts have noted that later production runs of the 970 EVO Plus line experienced silent component revisions, swapping the Phoenix controller for the newer "Elpis" controller (down-binned from the PCIe 4.0 980 PRO) and updated NAND; however, the 250GB capacity is less impacted by the performance variances observed in larger revised capacities. Users should be aware that the drive relies on "Intelligent TurboWrite" (dynamic SLC caching); once the cache is saturated, direct-to-TLC write speeds will decrease.
Affiliate Link Disclosure: Some product links on this page may be affiliate links. If you click on these links and make a purchase, we may earn a commission. This doesn't affect the price you pay or influence which products are displayed.