Corsair MP600 PRO NH 1000GB

SSD Description

The Corsair MP600 PRO NH is a stripped-down iteration of Corsair’s flagship storage tier, using the Phison PS5018-E18 controller architecture. This NVMe 1.4 controller is paired with dedicated DDR4 DRAM for address map caching to help maintain consistent random I/O performance and sustained throughput. The 1000GB variant integrates Micron’s 176-layer 3D TLC (B47R), a configuration tuned to saturate the PCIe 4.0 interface. By omitting factory-installed heatsinks, the drive relies on the host system’s thermal management. NH stands for No Heatsink, indicating this SKU is targeted at users with motherboard-integrated heat spreaders; the Phison E18 controller has high thermal density and can thermally throttle if left entirely bare during sustained writes. The PCB layout and component bill of materials are functionally identical to the Corsair MP600 PRO XT 1000GB, so performance is indistinguishable provided adequate cooling is applied.

Key Specifications

• Interface: PCIe 4.0 x4 / NVMe 1.4
• Controller: Phison PS5018-E18 (8-channel)
• NAND Type: Micron 176-Layer 3D TLC
• DRAM Cache: Yes (DDR4)
• Sequential Read: 7,000 MB/s
• Sequential Write: 5,700 MB/s
• Endurance: 700 TBW (Terabytes Written)
• Encryption: AES 256-bit encryption support

Hardware Alternatives

• Sabrent Rocket 4 Plus: shares the same controller and NAND combination, offering nearly identical synthetic performance benchmarks
• Silicon Power XS70: shares the same controller and NAND combination, offering nearly identical synthetic performance benchmarks
• TeamGroup T-Force Cardea A440 Pro: shares the same controller and NAND combination, offering nearly identical synthetic performance benchmarks
• Kingston KC3000: utilizes the same hardware but features different overprovisioning, affecting usable capacity and endurance ratings
• Seagate FireCuda 530: uses the E18/Micron 176L pairing but is distinguished by custom firmware validation and higher endurance specifications