Micron 5400 PRO 960GB

SSD Description

The Micron 5400 PRO 960GB is a SATA enterprise SSD that brings Micron’s 176-layer 3D TLC NAND to the mature SATA III interface. It is optimized for power efficiency and consistent I/O latency rather than peak throughput, runs on a proprietary Micron controller with dedicated DRAM for FTL management, and is engineered as a read-intensive volume that prioritizes QoS and reliability for 24/7 data center use.

Key Specifications

• Interface: SATA III (6 Gb/s)
• Form Factor: 2.5-inch (7mm Z-height)
• Sequential Read/Write: 540 MB/s / 520 MB/s
• Controller: Micron Proprietary Enterprise SATA Controller
• NAND Flash: Micron 176-layer 3D TLC
• Encryption Support: TCG Enterprise, TCG Opal 2.0, AES 256-bit hardware encryption
• Reliability: Full Power-Loss Protection (PLP), End-to-End Data Path Protection, MTTF 3,000,000 hours
• Use case: Read-intensive (approx. 1.5 DWPD), prioritizing QoS and reliability

Hardware Alternatives

• Samsung PM893: Similar performance profile and endurance rating (1.3 DWPD) using Samsung's proprietary controller and V-NAND; a functional alternative for server boot and read-caching workloads.
• Kingston DC600M: Third-party alternative used in tier-2 data center applications; shares the SATA 6 Gb/s bottleneck and 3D TLC composition but typically uses a Phison S12 DC controller instead of a vertically integrated design.
• Micron 5300 PRO: The direct predecessor; the 5400 upgrades from 96-layer 3D TLC to 176-layer 3D TLC, improving density and background operation efficiency while keeping the same thermal and electrical envelope.