ADATA Spectrix D35G 64GB (2x32GB)

ADATA Spectrix D35G 64GB (2x32GB) DDR4-3200 CL16 DIMM is a dual-channel kit of two 32GB 288-pin DDR4 DIMMs rated for DDR4-3200 with CL16 CAS latency. The modules include addressable RGB lighting and a low-profile aluminum heatsink. Without XMP activation they run at JEDEC default (2666 MHz at 1.2V); enabling the XMP/DOCP profile in BIOS is required to reach 3200 MHz. The kit's primary timings are CL16-20-20 and it is specified to run at 1.35V when the memory profile is loaded.

Platform Notes

• Intel (LGA1200 / LGA1700): Advertised speed requires XMP 2.0 activation in BIOS; defaults to 2666 MHz at JEDEC otherwise.
• AMD AM4: Most AM4 boards reach the advertised 3200 MHz by loading the memory profile (DOCP/EOCP) in BIOS, which reads the embedded XMP data.

Physical Notes

• Clearance: Module height is 36mm (133.35 × 36 × 6.6mm per stick) - low-profile enough for most tower coolers, but verify slot-one clearance on dense AM4 boards with large heatsinks.
• Thermal design: Aluminum low-profile heatsink with a triangular cross-section profile; RGB diffuser is integrated into the top edge of the spreader.

Comparable Options

• Kingston FURY Beast 64GB (2x32GB) DDR4-3200 CL16 - similar speed and capacity, available in non-RGB configurations with a lower heatsink profile.
• G.Skill Ripjaws V 64GB (2x32GB) DDR4-3200 CL16 DIMM - non-RGB flat heatsink, same capacity and speed tier.
• ADATA Spectrix D35G 64GB (2x32GB) DDR4-3600 CL18 DIMM - same product line at a higher frequency tier, relevant for AM4 builds where DDR4-3600 is a common operating point.